Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Winchester, NV
We provide independent Ghost Controls service across Winchester, from Strip-adjacent parking structures to condo-hotel slider gates in ZIP 89109. What makes our Ghost Controls work here different is the duty cycle: almost every operator we see runs 24/7 on a secured entrance, so heat-soaked boards and worn arms show up years ahead of residential schedules. We’re a gate specialist, trained on nine automation brands, background-checked, and backed by a written 90-Day Done Right Promise. Call (866) 623-9848 for a free estimate.

Why Winchester Residents Choose Us for Ghost Controls Service
Ghost Controls operators are common on condo-hotel, timeshare and commercial slider gates along the Strip corridor. Our technicians have up to 13 years of experience and see these units often enough that pattern failures, not sales literature, guide the diagnosis. We bench-test boards, load-test batteries and check limit learning before we recommend a part.
We’re an independent service provider. Ironworks Gate Co. Summerlin is not affiliated with, authorized by or endorsed by Ghost Controls, and we don’t sell the brand’s warranty. What we do is diagnose and repair the equipment in front of us, using OEM-equivalent or quality aftermarket components matched to the exact operator revision.
Parts are sourced per job once we’ve confirmed the model and revision. We don’t claim local stock. That means the right part arrives for your gate rather than a guessed generic. Most Winchester jobs are completed in a single visit, and the price is settled before a single bolt is turned. If you’re ready to book, Winchester service area details are here, or call (866) 623-9848 and a live person answers.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Winchester
Here’s what we actually find on Ghost Controls units around Winchester.
- Heat-soaked control boards. Sealed Ghost Controls enclosures on unshaded Strip-corridor parking gates bake through a Winchester summer. Once internal temps climb, boards drop into fault or refuse to learn limits. We bench-test before condemning the board.
- Photo-eye and safety-edge failures from dust and sand. Wind-blown dust clouds lenses and knocks them out of alignment, producing phantom reversals or a gate that stalls mid-travel and won’t close. Cleaning and realigning the sensors fixes most of these.
- Battery and solar supply degradation. Backup batteries carrying condo and timeshare slide gates through outages sulfate and fail faster under extreme heat cycling. You’ll notice short-run or no-run at the operator.
- Arm, gear and limit-switch wear from 24/7 cycles. Ghost Controls swing arms and slide drives on commercial and valet gates wear pivot bushings and strip gears years ahead of residential duty. Grinding, jerky travel and lost position are the tells.
- Monsoon-season track damage. Dust storms and flash flooding can jam or warp exterior slide gates, loading the operator past its limits. We check the gate itself before blaming the motor.
Ghost Controls Service in Winchester: What Local Conditions Mean for Your Equipment
Because the 89109 parcels around Winchester are hospitality, condo-hotel and mixed-use rather than single-family, almost every Ghost Controls operator here runs a 24/7 secured-entry cycle count. A failed gate can leave a casino or timeshare lot open, so this isn’t a driveway inconvenience. It’s a security gap that has to close fast. That changes the whole repair rhythm. Technicians routinely coordinate access windows with property security before touching the operator, working around guest traffic and shift changes rather than a homeowner’s schedule.
It also shortens equipment life. A residential Ghost Controls arm might see a few dozen cycles a day. Strip-corridor gates stack thousands of cycles a week on top of relentless sun and wind-blown sand. We plan repairs around that reality. On a high-cycle Winchester gate, replacing a fatigued operator often beats chasing repeated board and battery failures. On a sound unit with one failed sensor, it’s a straightforward repair. Same brand, very different math.
Ghost Controls Models & Products We Service in Winchester
We work on the Ghost Controls families you’ll find on Winchester gates: the Single Automatic Gate Opener (TSS1 series), the Dual Automatic Gate Opener (TDS2 series), the Heavy-Duty Single Opener (TSS1XP and HDAZ-style solar-rated units), and the solar and battery-backup accessory kits for slide and swing gates.
Replacement boards, arms, photo-eyes and batteries are readily available, so the honest approach is matching the exact operator revision rather than reaching for a generic. We confirm the model, check the revision, then source the part for the job. For a closer look at how we handle the brand, see our Ghost Controls service page. If you’re not sure which model you have, call (866) 623-9848 and we’ll help you identify it.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Winchester
Pricing depends on what’s actually failed and how hard the gate is working. On Winchester’s high-cycle commercial parcels, expect the higher end of the range because the duty cycle accelerates wear across more components. Your price is quoted and agreed before any work starts, so there’s no surprise on the bill. Here’s how the ranges typically land:
- Diagnostic and safety-sensor realignment: $95 – $175
- Photo-eye or safety-edge replacement: $150 – $325
- Battery backup replacement and load test: $180 – $400
- Control board replacement (heat-stress faults): $280 – $650
- Swing arm or slide drive rebuild: $350 – $900
- Full operator replacement on a high-cycle gate: $900 – $2,200
Every completed job is protected by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no arguing. Current offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% senior and veteran discount. Call (866) 623-9848 for an exact quote. Estimates are free.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Winchester
Heat-soaked control boards and thermal cutoff are the usual cause. Sealed enclosures on unshaded Winchester parking gates climb past the board’s comfort zone, and the operator drops into fault or refuses to learn limits. A bench test tells us whether it’s the board, the sensors or both. Call (866) 623-9848 to book a diagnostic.
It can, but not indefinitely at residential duty expectations. Strip-adjacent Winchester gates stack thousands of cycles a week, so arms, gears and bushings wear years ahead of schedule. When you see grinding or jerky travel, a rebuild or a heavier-duty operator is the honest call. Call us for a free second opinion on any written estimate.
Your backup battery has degraded and no longer holds under extreme heat cycling. Sulfated batteries are common on condo and timeshare slide gates around Winchester, showing up as short-run or no-run at the operator. We load-test the battery and replace the kit rather than guess. Call (866) 623-9848 for a quote.
Clouded, misaligned photo-eyes and a grit-loaded track are usually behind it. The fix is cleaning and realigning the safety sensors, clearing the track, then verifying limit learning so the operator tracks position correctly. Monsoon dust and wind-driven sand in Winchester make this a seasonal call. Estimates are free when you call (866) 623-9848.
Yes, we coordinate access windows with property security first. On Winchester commercial and condo-hotel parcels, a broken gate can leave a casino or timeshare lot open, so we time the repair so the secured entrance is never left unsecured. Call (866) 623-9848 to set up a service window.
Service Areas Near Winchester
We also serve homeowners and property managers in Summerlin, Spring Valley, Enterprise, Paradise and Las Vegas. Most of these are within a short drive of Winchester, so scheduling and access coordination stay simple.
Book Your Ghost Controls Service in Winchester Today
If your Ghost Controls gate is stalling, reversing or running on a dead battery, call (866) 623-9848. We keep same-day availability for repairs and emergencies in Winchester, and a live person answers around the clock. Every job comes with a written estimate first and our 90-Day Done Right Promise behind it.
Written by the team at Ironworks Gate Co.