Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Sunrise Manor, NV
We provide independent Ghost Controls gate repair across Sunrise Manor, and the thing that makes our work here different is simple: most of the gates we service in 89110 were built by the homeowner, not a builder, so the operator is often fighting a gate it was never lined up for. We work on Ghost Controls solar and AC swing and slide operators every week, and we diagnose the operator on its own merits rather than pushing a warranty claim or a brand replacement. Call (866) 623-9848 and a live person answers, day or night.

Why Sunrise Manor Residents Choose Us for Ghost Controls Service
Ghost Controls builds a good operator. We see enough of them to know. The Heavy-Duty Single Swing, the dual-swing tube-gate systems, the slide operators on driveway and RV gates, the solar-charged kits with keypad and remote bundles – we’re familiar with all of them, and we’re trained and equipped on nine gate-automation brands besides, so the correct fix gets made on the first visit whatever is bolted to your driveway.
What we bring to Sunrise Manor is the willingness to look at the whole gate, not just the box on the post. Because we’re independent, nobody tells us to favor a particular brand or a particular outcome. We use genuine Ghost Controls boards, arms, batteries and remotes when they’re the right fit, and quality aftermarket solar panels and hardware where they hold up better in desert heat. Every job is backed by our written 90-Day Done Right Promise, and your price is settled before a single bolt is turned. That’s a square deal, and it’s how we’ve kept at this for over 42 years.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Sunrise Manor
Five failures come up again and again on Sunrise Manor gates. Most of them start with the sun and the dust, not the operator.
- Brittle control boxes and cracked remote cases. Years of full Las Vegas Valley afternoon sun will degrade the ABS plastic on an unsheltered control box until the lid won’t seal and the remote housing splits at the seam. Once moisture gets in, the board starts acting erratic. We replace the housing and the board together so the fix holds.
- Dust-coated solar panels and dead batteries. Monsoon grit and windblown sand coat a solar panel faster on the east side of Sunrise Manor than anywhere sheltered in the valley. Output drops, the battery never fully charges, and the operator is dead by the second season. Cleaning alone rarely saves it by then.
- Arm brackets and limit cams working loose. Sun-baked swing gates warp, and when a gate frame moves, the arm bracket and limit cam move with it. The operator pushes past its stops and reverses mid-travel. That’s a geometry problem as much as a hardware one.
- Grit-packed rollers and tracks on slide operators. Desert dust packs into slide-gate tracks and turns the rollers into grinding wheels. Add a tumbleweed jammed against the gate and the obstruction reverse trips, the operator keeps retrying, and the control board burns out. We clear the track, free the rollers, and check the board before replacing anything.
- Weak voltage fighting a binding gate. The arm stalls, the board sees low voltage, and the gate stops halfway. Often it’s two problems at once: a dried-out hinge that’s sagging, and a low battery or dirty panel. Fix one without the other and it comes back next week.
Ghost Controls Service in Sunrise Manor: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every Ghost Controls repair in Sunrise Manor, and it doesn’t apply the same way to North Las Vegas or Henderson: this is an unincorporated pocket of the valley with no HOA oversight, so a large share of 89110 gates are owner-built or aftermarket RV and driveway gates rather than builder-standard units. That means a Ghost Controls operator here is often married to a non-standard gate – mismatched posts, swing geometry that was never squared for automation, hinges that were fine for a manual gate and aren’t fine for a motor pushing them every day. On the east side near the desert edge, sand and tumbleweed collect against those gates and the wide swing from 100°F-plus afternoons to cold winter nights works the hardware loose faster than in cooler, more sheltered parts of the valley. So when a Ghost Controls operator starts reversing or stalling on a Sunrise Manor property, the first question we answer is whether the gate is asking the operator to do something it can’t – and we tell you plainly which one needs the work.
Ghost Controls Models & Products We Service in Sunrise Manor
We service the Ghost Controls Heavy-Duty Single Swing (AXS and TSS series), the dual-swing tube-gate systems (TDS series), the slide-gate operators used on driveway and RV gates, and the solar-charged kits built around keypad and remote accessory bundles. Parts are matched to the job, not the shelf. We use genuine Ghost Controls replacement boards, arms, batteries and remotes when they’re right for the gate, and quality aftermarket batteries, panels and hardware where they last longer in desert heat. We don’t claim local stock – parts are sourced for each repair once we’ve diagnosed it, which is why the estimate you get is an accurate one.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Sunrise Manor
What you pay depends on what’s actually wrong, and we settle it before any work starts. A few ranges to plan around:
| Service | Typical Range |
|---|---|
| Diagnostic visit and written estimate | Free with repair |
| Solar panel or battery replacement | $180 – $340 |
| Control board replacement | $240 – $420 |
| Arm, bracket or limit-cam re-set and hinge work | $150 – $300 |
| Full operator service with gate re-square | $350 – $650 |
Gate size, whether the posts need re-setting, and how far gone the battery is all move the number. Your price is quoted and agreed before a single bolt is turned, so the bill matches the estimate. Call (866) 623-9848 for a free estimate on your Sunrise Manor gate.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Sunrise Manor
Usually it’s the sun working on the gate, not the operator. Afternoon heat warps the gate frame, the arm bracket and limit cam drift out of position, and the operator pushes past its stop and reverses. Re-squaring the gate and re-setting the limits fixes it more often than a new board does.
Dust and grit coat the solar panel until it can’t keep the battery charged, and the battery fails from constant undercharging. East-side Sunrise Manor properties near the desert edge see this fastest. Replacing the battery and panel together is the fix; cleaning the old panel rarely gets you through another summer.
Yes, and we do it regularly, but it takes more than bolting an arm on. An owner-built gate needs its posts and swing geometry squared first, or the operator will bind and fail early. We measure the gate, sort the geometry, then fit the operator. Call (866) 623-9848 to schedule a free measure and written price.
When both go at once, the control board or the power supply is the usual culprit rather than two separate failures. Sun-degraded housings letting moisture in is a common cause here. We diagnose the board before replacing remotes or keypads you may not need.
Repair it if the gate underneath is sound. A Ghost Controls operator on a straight, freely swinging gate is usually worth fixing. A bent or sagging gate that keeps eating operators is a gate problem, and replacing the operator won’t solve it. Call (866) 623-9848 for a straight answer and a free estimate.
Service Areas Near Sunrise Manor
We serve Sunrise Manor and the surrounding east valley, including Las Vegas, Winchester, Whitney, Paradise and Enterprise, plus Summerlin on the west side. If your gate is in one of these areas, we’ll get to it.
Book Your Ghost Controls Service in Sunrise Manor Today
Reversing halfway open, stalling, or dead by the second summer – we’ve seen it on Sunrise Manor gates plenty of times. Call (866) 623-9848 for a free estimate, and a live person will answer. Same-day availability on many repairs, and every job backed in writing.
Written by the team at Ironworks Gate Co. Summerlin.