Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Summerlin Homeowners Choose Ghost Controls Gate Repair
Ironworks Gate Co. Summerlin provides independent Ghost Controls gate repair in Summerlin, NV – we’re a local gate shop that services Ghost Controls operators, not a dealer or an authorized agent of the manufacturer. What makes our Ghost Controls work different is that we diagnose the actual failure (control board, limit settings, battery, or arm) before recommending anything, and we fit genuine Ghost Controls parts when the operator is still worth rebuilding. We are not affiliated with or authorized by Ghost Controls, and we don’t pretend to be. Call (866) 623-9848 and a live person answers, day or night.

Summerlin’s gates are mostly wrought iron, steel, and gated entry systems rather than wood, which means the Ghost Controls swing operators we see here are usually bolted to heavy metal leaves mounted on hinges that move under summer heat. That combination is the dominant repair profile on this side of the valley, and it’s what shapes most of the Ghost Controls calls we take.
Why Trust Ironworks Gate Co. Summerlin for Your Ghost Controls Gate Repair?
Our technicians have up to 13 years of experience, and they’re trained and equipped on Ghost Controls alongside eight other gate-automation brands. That range matters on this brand specifically. Ghost Controls operators are DIY-oriented kits, and a lot of the ones we see in Summerlin were installed by a homeowner or a general handyman who wired the arm, set the limits, and moved on. When something fails, the failure is often a setup problem rather than a product problem – limits set too tight, arm geometry off by a few degrees, a battery bay sitting in full desert sun. Our people know the difference between a board that’s actually gone and a limit that drifted as the hinges sagged. We fit genuine Ghost Controls boards, arms, and batteries when the frame and gearing are sound, and we’ll use a quality aftermarket receiver, keypad, or safety edge when the OEM part adds nothing.
Warranty-safe service is part of the deal here. We don’t cut, drill, or swap anything that would put an active Ghost Controls warranty at risk without telling you first. Every job is backed by our written 90-Day Done Right Promise – no paperwork, no arguing, we come back and make it right. And we don’t claim to stock Ghost Controls parts locally. We source them for the job, so you’re getting the part that fits your operator rather than whatever happens to be on a shelf.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in Summerlin
The failures we see on Ghost Controls operators in Summerlin tend to cluster around heat, dust, and hinge movement rather than motor failure. Here’s what we actually find on the Architectural Series (AXS), Heavy-Duty (TDS), and Tube Gate (TSS) lines:
- Control board and receiver faults after monsoon dust intrusion. Fine grit blows off Red Rock and the open lots along the 215 and works its way into the enclosure, then the late-summer humidity drives moisture in behind it. The result is lost remote signals, erratic open-close cycles, or a receiver that only responds at close range. On AXS and TDS boards we test the receiver under load before condemning it – a fault can be a corroded terminal rather than a dead board.
- Battery and solar-charge failures in desert heat. Ghost Controls backup batteries don’t hold charge the way they do in cooler climates. Cyclic stall or reverse-mid-travel is the classic symptom, and it’s almost always the battery no longer holding under a hot enclosure, not the motor. We test voltage under load rather than at rest.
- Limit-switch drift and arm-geometry misalignment on swing operators. This is what shows up as the gate stopping short, overshooting the post, or reversing on the close cycle. As hinges sag under summer heat, the arm geometry changes, and the limits the operator learned in cooler weather no longer fit. We reset limits after checking hinge play, not before.
- Corroded terminals and rusted hardware on the gate itself. A Ghost Controls arm bolted to a gate with a sagging hinge or a rusted latch carries load it wasn’t designed for, which triggers false obstruction stops. The operator gets blamed; the gate hardware is the real problem. We fix the gate before we touch the arm.
- Tube-frame gate strain on TSS operators. Tube gates are lighter, but they flex, and a TSS kit on a tube gate that’s lost true will bind mid-travel. We check gate square and roller alignment first, then re-evaluate the operator.
A swing gate with a Ghost Controls operator often starts misbehaving as cyclic open-close errors – the gate reverses halfway, beeps, or ignores the remote after a few cycles. The usual cause is a tired backup battery or a limit setting that has drifted, not a dead motor. A qualified technician typically tests battery voltage under load, resets the limits, and checks arm geometry and hinge play before deciding whether the board or the gate hardware needs attention.
Ghost Controls Parts & Our Repair-vs-Replace Approach
OEM versus aftermarket is a real decision on Ghost Controls, not a sales pitch. Boards, arms, and batteries are worth fitting genuine – those are the parts where an off-brand substitute tends to come back within a season. Keypads, receivers, and safety edges are a different story: a quality aftermarket part from a reputable maker often works as well as the OEM and saves money, and we’ll say so. What we don’t do is claim to stock Ghost Controls parts in Summerlin. We identify the failure, order or source the correct part for your specific model, and schedule the return visit.
Our stance is repair-first. A Ghost Controls AXS or TDS arm with a failed board or a battery that’s stopped holding charge is usually worth rebuilding – the gearing and the housing are still sound. A bent arm on a sagging gate is the opposite: replace the operator now and you’ll be back in a year, because the gate is what’s killing it. Fix the gate, then decide about the operator. If you’ve had a quote for a full replacement and want a second look, we’ll give you a free second opinion on any written estimate. Call (866) 623-9848.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We test the operator under load, read the board, check battery voltage under load rather than at rest, and evaluate arm geometry and hinge play on your Summerlin gate. Most Ghost Controls failures announce themselves here.
- 2
Repair or installation. Once we know what’s actually wrong, we quote the price and agree it with you before a single bolt is turned. Genuine Ghost Controls boards, arms, and batteries where they’re warranted; quality aftermarket where they add no benefit.
- 3
Test. We cycle the gate open and closed multiple times under its real conditions – including against the wind and in full afternoon sun, which matters more in Summerlin than in most places – and confirm the limits, obstruction sensing, and safety edges are behaving.
- 4
Warranty and follow-up. Every Ghost Controls job is covered by the written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing. Done right, and backed in writing.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in Summerlin
We work on the Ghost Controls Architectural Series (AXS) residential swing operators, the Heavy-Duty (TDS) single-swing DIY kits, the Tube Gate (TSS) operator kits for tube-frame gates, and the solar and battery-backup accessory kits that so many Summerlin gates rely on through the brutal summer months. Battery backup is where we see the most failures, so we treat it as a first-class service rather than an afterthought. We also handle gate realignment, hinge repair, latch adjustment, and welding – because an operator is only as good as the gate it’s bolted to. If your Ghost Controls gate is out of true, we’ll fix the gate and the automation together rather than squeezing a new arm onto a sagging one.
We Also Service These Brands
Ghost Controls is one brand among nine we’re trained on. We also service LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite – which means we can give you an honest comparison if you’re weighing a Ghost Controls repair against replacing the whole operator. We’re not tied to one manufacturer, so the recommendation you get is the one that fits your gate and your budget, not the one that fits a quota.
FAQs – Ghost Controls Gate Repair Service in Summerlin
No. We’re an independent Ghost Controls service provider in Summerlin and we are not affiliated with or authorized by Ghost Controls. That independence is a benefit to you: we diagnose the actual failure and recommend the honest repair, rather than defaulting to a full swap-out. If you’d rather use the manufacturer’s warranty channel, we’ll tell you that too.

Yes, we fit genuine Ghost Controls boards, arms, and batteries when the operator’s frame and gearing are still sound. For keypads, receivers, and safety edges we’ll use a quality aftermarket part when the OEM part adds no real benefit, and we’ll say so up front. The part is quoted and agreed before any work starts.
Most Ghost Controls repair jobs are completed in a single visit, though it depends on whether a part needs sourcing. A battery replacement or limit reset is quick; a board swap on an AXS operator is a bit longer; a gate realignment plus operator service takes longer still. We’ll give you an honest time estimate when we quote the work.
We service the Architectural Series (AXS) residential swing operators, the Heavy-Duty (TDS) single-swing DIY kits, the Tube Gate (TSS) operator kits for tube-frame gates, and the solar and battery-backup accessory kits. If your model isn’t on that list, call (866) 623-9848 – there’s a good chance we can still help.
Not when it’s done correctly. We take warranty-safe practices seriously: we don’t cut, drill, or swap anything that would put an active Ghost Controls warranty at risk without telling you first, and if a repair would affect the warranty we’ll explain it before we start. Every Ironworks job is separately covered by our own written 90-Day Done Right Promise.
Most Ghost Controls repairs in Summerlin run $180 to $450 depending on the part and the model, with battery and limit issues at the low end and board replacements at the high end. Prices are quoted and agreed before any work starts, so there are no surprises on the bill afterward. Call (866) 623-9848 for an exact quote – estimates are free, and our $50 Off Any Repair Over $250 offer applies.
Almost certainly not. On a Ghost Controls operator, “opens but won’t close” is usually a limit setting that drifted, an obstruction sensor or safety edge that’s tripped or misaligned, or a receiver fault. We diagnose it properly before recommending a part. Call (866) 623-9848 for an exact quote.
Usually yes. A failed board or a tired battery on an AXS or TDS arm is worth rebuilding provided the gearing and housing are sound. The exception is when the gate itself is sagging or out of true – in that case the operator is being overloaded and the gate needs fixing first. Call (866) 623-9848 and we’ll tell you which it is.
Reversing mid-travel on a Ghost Controls operator is almost always a battery that no longer holds charge under desert heat, or an obstruction stop triggered by gate hardware binding. In Summerlin, heat and hinge sag are the usual culprits. Start with battery voltage under load. Call (866) 623-9848 for an exact quote if you’d rather we test it.
Yes. Desert heat in Summerlin degrades the sealed backup battery faster than cooler climates, and an operator that works fine in spring can stall or reverse by July. Testing voltage under load rather than at rest is the only reliable check. Call (866) 623-9848 for an exact quote on a battery replacement – or ask about our $89 Seasonal Tune-Up.
Yes. We can add a keypad, a phone-based entry, or extra remotes and receivers to an existing Ghost Controls operator, and we’ll match the accessory to your specific model. The work is measured and scheduled rather than same-day, and you’ll get a written price before we start. Call (866) 623-9848 for a free estimate.
Book Your Ghost Controls Service in Summerlin, NV
If your Ghost Controls gate is reversing, beeping, ignoring the remote, or just not closing the way it should, call Ironworks Gate Co. Summerlin at (866) 623-9848. A live person answers, 24 hours a day, 7 days a week. The price is quoted and agreed before we start, every job is backed by the written 90-Day Done Right Promise, and this is the company that makes a 40-year-old gate close like the day it was hung. Free estimates. Free second opinion on any written estimate. We will be there when we say.
Written by the team at Ironworks Gate Co. Summerlin.