Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Enterprise, NV
We provide independent Ghost Controls repair across Enterprise, NV, and the thing that sets our work here apart is simple: on caliche-laced soil in 110°F heat, the operator is often the last thing that failed, not the first. Homeowners in ZIP code 89139 call us about a gate that reverses partway because a post has crept, or a swing arm that flexed a few degrees off after a summer of expansion, not because the control board is dead. Ghost Controls is a solar-friendly, DIY-oriented line widely installed across southwest Valley tract homes, and we know its quirks well enough to repair the actual failure instead of swapping a whole unit. We’re Ironworks Gate Co. Summerlin, our technicians have up to 13 years of experience, and you can reach a live person at (866) 623-9848 any hour.

Why Enterprise Residents Choose Us for Ghost Controls Service
Enterprise’s master-planned neighborhoods, Southern Highlands and Mountains Edge among them, are full of Ghost Controls operators on decorative iron driveway gates and pedestrian gates, and most were installed a decade or less ago. That age profile matters. When a gate that’s five to fifteen years old starts acting up, the Ghost Controls kit is rarely worn out; the ground and the hinges around it have moved.
We work on Ghost Controls as an independent shop, never as a manufacturer-affiliated or authorized service center. That independence is deliberate. We diagnose the board, the limit switch, the arm, and the battery on their own merits, then tell you which one actually failed. Because Ghost Controls maintains a real OEM parts channel, we can usually match control boards, limit switches, arms, and solar batteries to the original kit rather than pushing you toward a different brand. Same-day and 24/7 emergency availability on repairs, upfront pricing settled before a bolt is turned, and a written 90-Day Done Right Promise on every job.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Enterprise
Ghost Controls failures cluster in predictable patterns, and in Enterprise each one has a local cause behind it.
- Solar and battery sag. Summer heat past 110°F combined with UV-degraded control-box plastics cuts battery capacity, so the gate stalls partway or reverses intermittently even with a panel that still shows a charge. We test the battery under load rather than trusting the indicator.
- Limit switch drift. The swing arm’s set limits shift once hinges and posts settle on caliche-laced soil. The gate slams into the stop, reverses halfway, or stops short of full travel. This is the single most common Ghost Controls call we take in Enterprise, and it’s a setting problem, not a dead operator.
- Arm and bracket fatigue. Repeated heat expansion on a slightly misaligned decorative iron gate stresses the operator arm and its mounting bracket. Screws strip, arms bend, and the gate starts to drag.
- Control board and keypad moisture failures. Monsoon rain works its way into outdoor keypads and control boxes, taking out entry codes or unpairing remotes. Sometimes the board is fine and a gasket failed; sometimes it’s the board.
- Hinge and post failure under a working operator. The motor pulls fine, but a settled post has the gate sagging and dragging. Fixing the operator without fixing the hinge leaves the same problem to return by the next hot spell.
Ghost Controls Service in Enterprise: What Local Conditions Mean for Your Equipment
The fact that shapes Ghost Controls work in Enterprise more than any other: gates here are young but already out of alignment, because the caliche-laced soil and summer heat expansion work fast. A gate hung five or ten years ago in a 89139 subdivision can have posts that have shifted a fraction of an inch, and that fraction is enough to throw off a Ghost Controls limit switch and send the gate reversing mid-travel. Add HOA architectural rules in Southern Highlands and Mountains Edge that dictate the original powder-coat finish and gate style, and the repair gets a second layer: a visibly sagging gate can draw a violation notice, so we photograph the repair and document what was corrected, giving you a record for HOA architectural review. In a typical Enterprise home, a Ghost Controls swing operator starts reversing or stalling on a decorative iron driveway gate because the limit switch drifted after the gate’s hinges and posts shifted through a summer of heat. A qualified technician resets the limits, realigns the gate and hinges, checks the solar battery’s capacity, and documents the work with photos.
Ghost Controls Models & Products We Service in Enterprise
We service the Ghost Controls line across its common configurations: TSS1 and TDS2 single-arm swing gate operator kits, the heavier-duty AXS1 and AXS2 swing arm operators, solar-charged setups with battery backup, and the tube-gate and decorative-panel kit bundles popular on HOA-governed lots in Enterprise. On parts, we favor OEM for electronics, meaning control boards, limit switches, and solar batteries matched to your original kit, and quality aftermarket hardware for hinges and brackets where it holds up better to desert heat. We don’t claim local parts stock; parts are sourced per job once we’ve diagnosed it, which keeps the right part on the first visit instead of a guessed one. When the operator is sound, repair is the right call. When an arm or board is past saving, we say so plainly.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Enterprise
Every price below is quoted and agreed before any work starts, so the number on the invoice is the number you approved.
- Diagnostic visit and written estimate: free
- Limit switch reset and gate realignment: $95 to $175
- Hinge and post repair: $150 to $400 depending on how many posts need resetting
- Control board or keypad replacement with OEM part: $180 to $340
- Battery backup replacement on a solar configuration: $140 to $260
- Operator arm or bracket replacement: $200 to $450
Cost drivers are straightforward: how much post and hinge work is needed, whether the part is OEM electronics or hardware, and whether the gate needs realignment before the limits can be set correctly. Our standing offers apply here too: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (866) 623-9848 for an exact quote; estimates are free.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Enterprise
Usually not. Reversing mid-travel is the classic sign of limit switch drift or a battery that can’t hold load under heat, and both are repairable. In Enterprise, caliche soil movement and 110°F expansion throw the swing arm’s limits off far more often than they kill the operator itself. Call (866) 623-9848 and we’ll diagnose the actual cause, estimates free.
Because the operator is doing its job and the gate isn’t. A sagging gate on a running Ghost Controls operator points to hinge or post settlement, common in Enterprise’s expansive caliche soils, and the motor simply drags the gate along a bad path. Fixing the hinge and post restores the gate; leaving it stresses the arm and bracket until those fail too.
They can. HOA architectural rules in those Enterprise communities require the original powder-coat finish and gate style, so a visibly sagging gate can trigger a violation notice. We document repairs with photos so you have a record for HOA architectural review, and we match finishes and styles where the repair calls for it.
Often the panel is fine and the battery behind it isn’t. UV-degraded control-box plastics and sustained 110°F-plus heat cut battery capacity even when the panel reads a charge, so the gate stalls or reverses intermittently. We test the battery under load and replace it with an OEM match when it’s spent. Call (866) 623-9848 for an exact quote on battery backup replacement.
Yes, in most cases. Monsoon rain finds its way into outdoor keypads and control boxes, taking out entry codes or unpairing remotes, and it’s often a failed gasket or a moisture-damaged board rather than a dead system. We diagnose which and replace only what’s failed. Call (866) 623-9848 to get it looked at.
Service Areas Near Enterprise
We serve Ghost Controls owners across Enterprise and the surrounding southwest Valley, including Summerlin, Spring Valley, Las Vegas, Winchester, and Paradise. If you’re just outside those lines, call and we’ll tell you straight whether we cover your street.
Book Your Ghost Controls Service in Enterprise Today
If your Ghost Controls gate is reversing, sagging, or stalling in the Enterprise heat, call (866) 623-9848. Repairs are often same-day, emergency availability runs around the clock, and a live person answers every call. Upfront price before any work starts, and a written 90-Day Done Right Promise behind it. A square deal, done right, and backed in writing.
Written by the team at Ironworks Gate Co.