Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Sunrise Manor, NV
If your driveway gate has started to drag, stick, or stop halfway, the fix usually starts with a phone call and a look at the hardware rather than a sales pitch for a new gate. We repair, install, automate, and re-weld driveway and estate gates for homeowners across Sunrise Manor, NV, including the older single-family pockets of 89110 where block walls, RV access gates, and aftermarket ironwork are the norm. Call (866) 623-9848 and a live person answers, day or night, with upfront pricing settled before any work begins.
Why Sunrise Manor Homeowners Choose Ironworks Gate Co. Summerlin
Sunrise Manor isn’t the guarded, HOA-uniform valley you see west of here. A large share of the homes in 89110 sit on generous lots with block-wall perimeters, owner-built iron and chain-link driveway gates, and backyard RV gates – and the people who call us tend to want that gate repaired, not replaced. We’re set up for exactly that kind of work. Our technicians have up to 13 years of experience, work background-checked and in uniform, and are trained on the automation brands that turn up on Sunrise Manor driveways, including Ghost Controls, DoorKing, and Mighty Mule.
You’ll see us most often around Charleston Heights, Desert Pines, and the streets feeding off Nellis Boulevard, where sun-baked hinges and wind-driven grit do the most damage. Every completed job is covered by our written 90-Day Done Right Promise – if it isn’t right, we come back and make it right, no arguing and no paperwork chase. When we give you a price, that’s the price on the bill. Call for a free estimate and we’ll tell you plainly whether your gate needs a repair or a replacement.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Sunrise Manor
It helps to know which part of the gate is actually failing before anyone quotes you a number. Here’s the full scope of what we handle in Sunrise Manor, from hinges and welds to keypads and automation.
Gate Repair
Sagging hinges, dropped latches, bent frames, and gates that scrape the driveway are the most common calls we get in Sunrise Manor, and most of them trace back to sun-baked hardware and dry pivot points. We repair manual swing gates, wrought-iron and chain-link driveway gates, and sliding gates so they close squarely again. Learn more about our Gate Repair in Sunrise Manor.

Gate Installation
When a gate is beyond a sensible repair, we hang a new one – iron, ornamental, or sliding – fitted to your actual driveway and lot, not a catalog number. Every install is measured first and quoted in writing before a single bolt is turned. Learn more about our Gate Installation in Sunrise Manor.

Gate Motor & Opener
If your operator has quit, stalled, or started reversing on its own, we diagnose the motor, the arms, and the safety edges together rather than guessing at one part. We’re trained and equipped on Ghost Controls, DoorKing, Elite, and Mighty Mule, so the correct fix is made on the first visit. Learn more about our Gate Motor & Opener in Sunrise Manor.

Gate Access Control
Keypads, remotes, and entry systems that stop responding usually have a simple culprit – a dead battery, a corroded contact, or a sun-worn control board. We service residential access control so one working remote isn’t the only way through your gate. Learn more about gate access control for Sunrise Manor homes.
Gate Parts & Welding
Hinges, rollers, latches, and track components wear out long before the gate frame does, and we carry and fit the right parts rather than forcing a mismatch. When a weld has cracked, we repair it properly on site. Learn more about gate parts and welding in Sunrise Manor.
Neighborhoods We Serve in Sunrise Manor
We work all over Sunrise Manor and the surrounding 89110 streets, and most repair calls are answered on the same day. These are the areas we see most:
- Charleston Heights – older ranch homes with iron and RV driveway gates
- Desert Pines – block-wall perimeters and sun-exposed sliding gates
- The Nellis Boulevard corridor – heavy wind-and-dust wear on rollers and latches
- The desert-edge streets east of Sunrise Manor – sand and tumbleweed buildup against gates
Wherever you are in Sunrise Manor, you’ll get the same response and the same upfront price before work starts.
See the difference
Before
After
Before
After
Before
AfterWhy Sunrise Manor’s Climate & Housing Affect Gate Repair
The desert does a particular kind of damage here. Out on the east side of Sunrise Manor near the desert edge, windblown sand and tumbleweed collect against driveway and RV gates, and that grit works its way into rollers, tracks, and hinges until a gate that used to glide starts to bind. Layer on the wide temperature swing – 100°F-plus afternoons baking the metal, then cold winter nights contracting it again – and hardware works itself loose faster than it does in the cooler, more sheltered parts of the valley. Combined with mid-century to 1980s ranch homes and owner-built gates, that means we see a lot of aging manual swing gates and sun-warped iron that simply need new hinges, a re-weld, and a proper adjustment rather than an expensive replacement. It’s the same story every summer, and it’s the reason the desert-edge streets keep us busy.
Pricing for Gate Repair in Sunrise Manor
Nobody likes a surprise on the bill, so here’s the honest shape of things. Small fixes like a hinge swap, latch adjustment, or re-weld usually run modest; a full motor or opener replacement costs more because the parts do. The exact numbers depend on your gate and what’s actually failing, which is why we quote and agree on a price before any work starts. Active offers make it easier: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% senior and veteran discount. Call (866) 623-9848 for an exact quote – estimates are free.
Service Area – Cities Near Sunrise Manor
Sunrise Manor sits in the eastern valley, and we serve the neighborhoods around it too. We work regularly in Whitney just to the south, Winchester to the west toward the Strip, Las Vegas proper, and North Las Vegas to the north. If you’re just outside 89110, call and we’ll tell you plainly whether we cover your street.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunrise Manor
Most Sunrise Manor gate repairs fall in the low-to-mid hundreds, with simple hinge, latch, and re-weld jobs on the lower end and motor or opener replacement higher. We quote and agree on the price before any work starts, so there’s no surprise on the bill. Call (866) 623-9848 for an exact quote – estimates are free.
In most cases, yes – we aim to answer Sunrise Manor repair calls the same day, and a live person takes your call around the clock. Tell us what the gate is doing and we’ll give you a straight answer on timing. Call (866) 623-9848 and we’ll get you on the schedule.
Yes – a proper installation includes the power run and the safety edges, and we handle both. That work is measured and scheduled rather than rushed, so you’ll get a free measure and a written price before anything is ordered. Call (866) 623-9848 to set up a measure.
A full installation includes the new gate hung to your driveway and lot, the posts and hardware, the operator if you’re automating, and the safety edges, all sized to your property. Because it’s measured work, we quote it in writing after a site visit rather than promising same-day service. Call (866) 623-9848 for a free estimate.
Very likely – we’re trained and equipped on nine major automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. If your opener is one of them, we can usually make the correct fix on the first visit. Call (866) 623-9848 and tell us the brand on your driveway.
Written by the team at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Sunrise Manor Customers Say
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson