Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Access Control Across Boulder City
If the keypad on your Boulder City driveway gate has gone quiet, or the remote only works when you’re standing three feet from the post, we can help. Ironworks Gate Co. Summerlin works on gate access control across Boulder City, from the Bureau-era bungalows in the historic core to newer homes out toward the edges of town. Boulder City is a small market with old hardware, and that changes how this work gets done. Access control here is as much about preserving what’s already on the property as it is about wiring in a new reader. Call (866) 623-9848 and a live person picks up, day or night.
Why Ironworks Gate Co. Summerlin Is Boulder City’s Preferred Gate Access Control Company
Boulder City homeowners tend to keep their properties a long time, and they remember who did what. Our reputation here rests on showing up when we say and finishing the job in one visit whenever the hardware allows. Our technicians have up to 13 years of experience, are background-checked and uniformed, and are trained on nine gate-automation brands, so the equipment on your particular gate isn’t a mystery when we arrive.
Boulder City customers call us back because the price is settled before a bolt is turned, and because every job carries the written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. No arguing, no paperwork chase. That’s the standard on the 400th job the same as the first.
We also know this town’s hardware. A gate hung in 1936 doesn’t take a control board the way a 2019 model does, and our team reads that difference quickly. From ZIP 89005 to 89006, Boulder City gets the same straight answer: what can be fixed, what should be replaced, and what it will cost.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Access Control Services in Boulder City
Keypad Entry
A keypad is usually the first thing to fail on a legacy gate, and in Boulder City the cause is often a control board baked by two decades of desert sun. We retrofit modern keypads onto existing operators, matching the housing to the gate’s look when preservation review applies. A typical keypad replacement in Boulder City runs $220 – $450 installed, depending on whether the operator itself needs work.

Remote Control
Remotes quit after dust storms more often than people expect. Grit works into the receiver contacts and the gate stops answering. We test the whole chain, from the handheld to the receiver to the operator, so you’re not buying a new remote to solve an old wiring problem. Remote and receiver service in Boulder City usually lands between $120 and $280.

Phone Entry
Phone entry lets you open the gate from anywhere, which matters for Boulder City homeowners who travel or have family checking on the house. We wire these into the existing operator where the board supports it, and we’ll tell you plainly when it doesn’t. Expect $300 – $600 for a phone-entry retrofit on a compatible operator.

Card Reader and Video Intercom
Card readers and video intercoms take the hardest hit near the Lake Mead shoreline, where humidity and mineral air corrode exposed contacts faster than anywhere else in the valley. A typical card reader or video intercom install in Boulder City runs $400 – $900, depending on distance from the operator to the entry point and how much trenching the run requires.
For the full scope of what we handle, see our Gate Access Control services page.
Trusted Brands We Service in Boulder City
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Linear, and we see all of them on Boulder City gates. Older DoorKing units still run on plenty of historic-district properties. We don’t claim to stock parts locally, because we don’t. What we do is diagnose accurately on the first visit so the correct part gets ordered once, not three times, and your gate is back in service without a string of return trips.
Common Gate Access Control Problems We See in Boulder City Homes
- Obsolete control boards in legacy operators. Older DoorKing and FAAC units fail when UV-baked capacitors and dust-clogged components finally give out, leaving the gate stuck open or unresponsive. Replacement boards for these units are often no longer made, which pushes the conversation toward retrofit.
- Monsoon-loose hinges and latches. Seasonal wind and dust storms work hinges and latches loose, and a gate that’s out of alignment won’t trigger reliably even when the electronics are fine. We check the mechanical side before we touch the control side.
- Lake Mead corrosion exposure. Properties on the east side near the shoreline see accelerated wear on exposed contacts and circuit boards in card readers and video intercoms. Intermittent access failures on those gates usually trace back to corrosion, not programming.
- Gates that predate modern safety requirements. Many historic-core gates were hung long before UL 325 entrapment protection existed. Any access control upgrade on those gates needs photocells or edge sensors added, and that’s not optional.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Access Control in Boulder City, NV
Here’s what access control work generally runs in Boulder City:
| Service | Typical Range |
|---|---|
| Keypad replacement or retrofit | $220 – $450 |
| Remote and receiver service | $120 – $280 |
| Phone entry retrofit | $300 – $600 |
| Card reader or video intercom install | $400 – $900 |
| Safety photocells or edge sensors added | $180 – $400 |
| Full operator replacement (when retrofit won’t hold) | $1,400 – $2,800 |
What moves the number: whether the existing operator can take a modern control board, how far the entry point sits from the operator, and whether the gate needs mechanical work before the electronics will behave. The price is quoted and agreed before any work starts, so the invoice matches the estimate. We also offer a Free Second Opinion on Any Written Estimate, and $50 Off Any Repair Over $250. Senior and Veteran customers get 5% off, always.
We Also Serve Cities Near Boulder City
We work throughout the surrounding area as well, including Henderson, Whitney, Paradise, and Enterprise. If you’re just outside Boulder City limits, call and we’ll confirm coverage. For more on what we do across the region, see Gate Access Control in Boulder City and the surrounding communities we serve.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Access Control in Boulder City
Yes, in most cases, but the approach has to be careful. Boulder City’s historic district requires preservation review for any visible change to original Bureau of Reclamation-era gates, so the work usually means hiding the new control unit or matching its finish to the 1930s metalwork rather than bolting a modern box onto the gate face. We plan the retrofit around what the review will accept before we order anything. Call (866) 623-9848 to talk through your gate.
Dust in the receiver contacts or a hinge knocked out of alignment, most likely. Monsoon wind drives grit into the receiver and loosens the gate just enough that the operator can’t complete its cycle. Most of these are a straightforward fix once we identify which side of the problem it is, and remote service in Boulder City typically runs $120 – $280.
Repair it if the control board is available and the gate’s hinge posts and rack are sound; replace it if the board is obsolete or the metal is too worn to automate reliably. In Boulder City, we see a lot of the second case with 1930s gates whose original hardware has reached its limit. A homeowner in the historic core with a failing 1930s wrought-iron pedestrian gate often finds the original control board is no longer made, which pushes the job toward either a retrofit of a modern unit onto the existing operator or full replacement. We’ll tell you which is the cheaper answer for your gate, and the price is agreed before work begins.
Yes, and they aren’t optional. Any gate that predates UL 325 entrapment protection needs photocells or edge sensors added when the access control is upgraded, and that applies to most historic-core gates in Boulder City. Adding them typically runs $180 – $400. This is a safety matter we don’t cut corners on. Call (866) 623-9848 for an exact quote on your gate.
Corrosion. The Lake Mead shoreline adds humidity and mineral exposure that eats at exposed contacts and circuit boards faster than anywhere else around Boulder City, and card readers and intercoms take the worst of it because their connections sit outside year-round. Sealed housings and proper weatherproofing at the install make a real difference. If yours is failing intermittently, call (866) 623-9848 and we’ll trace it to the source.
Ready to Get Your Gate Working Again?
Whether it’s a keypad that’s quit, a remote that only works up close, or a 1930s gate that needs its access control brought into the present, we’ll give you a straight answer and a price before anything gets touched. Call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. A live person answers around the clock. Free Second Opinion on Any Written Estimate, $50 Off Any Repair Over $250, and an $89 Seasonal Tune-Up are all available, and every job is backed in writing with the 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co.