Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Access Control Across Enterprise
Enterprise homeowners call us when the keypad stops taking the code, when the clicker works from the driveway but not from the street, or when a visitor can’t get through without walking up to the house. We handle keypad entry, remote control, phone entry, card readers, and smart access across the 89139 corridor, and we’re familiar with the newer subdivisions off Decatur and Blue Diamond where most of this equipment lives. A live person answers our phone 24 hours a day, so when the gate stops cooperating on a Friday night, you’re talking to someone, not a menu. For a free estimate, call (866) 623-9848.
Why Ironworks Gate Co. Summerlin Is Enterprise’s Preferred Gate Access Control Company
Enterprise is a newer part of the valley, and we’ve spent enough time in its neighborhoods to know how the gates here were built and where they typically fail. The homes in Southern Highlands and Mountains Edge sit under HOA architectural rules, which matters when a keypad, intercom, or operator housing has to match the original iron finish and not just work correctly. We document our work with photos so HOA approval doesn’t become your problem.
We’re a gate company that specializes in gates, not a general handyman squeezing in a side job. Our technicians have up to 13 years of experience, they’re background-checked and uniformed, and they’re trained on nine automation brands including DoorKing and Elite, so the fix is usually made on the first visit. Every job is covered by our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right, no arguing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Access Control Services in Enterprise
Keypad Entry
Keypads take a beating in Enterprise. UV fades the buttons, dust gets behind the membrane, and a unit mounted in direct sun can read a correct code as a wrong one. We install and service wired and wireless keypads that hold up to the heat, and we set the codes so family, housekeepers, and the pool guy each get their own. If your current keypad is more than about eight years old and lives in full afternoon sun, replacing it is usually cheaper than chasing the fault.

Remote Control
Most remotes that “stop working” in Enterprise are actually fine. The receiver is the problem, usually a control board cooking inside a plastic enclosure that sees 110°F plus all summer. We test the receiver before we sell you a new remote, and we’ll pair a fresh clicker for every car in the household. For multi-car driveways in the newer tracts, a single multi-button remote often beats three separate ones.

Phone Entry
Phone entry lets you buzz someone in from the kitchen or from out of town. It’s the right fit for a gated driveway where deliveries and guests arrive without warning. In Enterprise, where many estate-style gates sit well back from the house, phone entry removes the walk to the keypad. We connect it to your existing operator where the wiring allows, and where it doesn’t, we tell you plainly what a dedicated run will cost before we start.

Card Reader
Card readers make sense for households with regular help, a home business, or a rental casita. We install readers that log each entry, so you know who came through and when. On Enterprise lots where the pedestal sits exposed to the western sun, we favor readers with a weather-rated housing and a shade cover, because plain plastic readers fog and fail faster here than anywhere else in the valley.
Trusted Brands We Service in Enterprise
We service the brands that actually show up on Enterprise driveways: DoorKing for access control and telephone entry, Elite for residential swing and slide operators, Ghost Controls for the DIY-leaning installs that homeowners later want done properly, and Viking for intercom and entry systems. We don’t keep a parts warehouse, and we won’t pretend to. What we do promise is the right diagnosis on the first visit and a turnaround that doesn’t leave your gate propped open for a week. On the brands we carry in our service lineup, most repairs are handled in one trip.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Access Control Problems We See in Enterprise Homes
- Undersized operators on gates built manual. Many homes in the newer Enterprise subdivisions started with a hand-push gate before the builder added an operator later. Without proper mounting reinforcement, the arm warps and the motor strains through summer heat. Replacing the operator alone won’t fix it; the bracket and hinge geometry have to be corrected at the same time.
- Shared 15-amp circuits that mimic a dead control board. This is the big one in the 89139 corridor. Builder-installed operators often share a single 15-amp circuit with landscape lighting, and that voltage drop looks exactly like a failed control board. We test the circuit under load before we quote a replacement. If the power run is undersized, the honest fix is a dedicated conduit, not another operator.
- Missing or dead safety photocells. Older installations frequently have no working photocells or loop detectors, which fails UL 325 entrapment protection checks. A gate that closes on a child or a pet is a real hazard, so we retrofit the sensors and run the conduit they need to function correctly.
- Heat and UV degradation of control boxes. Plastic control housings crack and yellow after several summers of desert sun, letting in dust and moisture that kill the electronics inside. A heat-rated enclosure and a shade mount add years to the life of the equipment.
Take the case of a homeowner in a newer Enterprise subdivision whose driveway swing gate opens halfway and stops, especially on 110°F afternoons. The usual cause is a builder-grade LiftMaster or Linear operator with a degraded board and a voltage drop from an undersized run shared with landscape lighting. A qualified local pro tests the circuit under load, replaces the operator with a heat-rated model, and runs a dedicated conduit if the original wiring won’t carry the load.
Pricing for Gate Access Control in Enterprise, NV
Here’s what access control work typically runs in Enterprise. A keypad replacement with programming runs about $180 to $320. A new remote and receiver pair is $95 to $185. Phone entry or intercom installation lands around $450 to $900 depending on wiring distance. A card reader with a pedestal and a dedicated power run is $850 to $1,800. And if your gate needs a dedicated conduit run to fix the voltage drop problem, budget $600 to $1,200 for that alone. Every price is quoted and agreed before a single bolt is turned, and the estimate is free. We also offer $50 off any repair over $250, and a 5% discount for seniors and veterans.
We Also Serve Cities Near Enterprise
We work throughout the southwest valley, so if you’re in Enterprise and want to check whether we cover your street, the city page has the full picture. We also serve Spring Valley, Paradise, Winchester, and Henderson, and our Gate Access Control team handles every one of those areas with the same standards. Call (866) 623-9848 and tell us where you are.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Access Control in Enterprise
That’s almost always a voltage drop or an undersized circuit, not a failed operator. In Enterprise’s 89139 corridor, many builder-installed operators share a single 15-amp circuit with landscape lighting, and when the lights draw power, the gate loses amps and stalls partway open. Heat makes it worse on 110°F afternoons. A qualified technician tests the circuit under load, and the honest fix is a dedicated power run, not a new motor. Call (866) 623-9848 for a free estimate.
Check whether the gate hardware and hinges can carry an operator and whether there’s a power source near the gate post. A hand-push gate in a newer Enterprise subdivision often lacks the mounting reinforcement an operator needs, and without it the arm warps within a season. A qualified tech sizes the operator to the actual gate weight and confirms the power run is adequate before any equipment is ordered. Call (866) 623-9848 to schedule a free measure and written quote.
If your gate opens and closes automatically and the photocells or loop detectors aren’t working, yes, you need the upgrade. UL 325 entrapment protection requires functioning sensors on any automatic gate, and older Enterprise installations often have none or have units that died years ago. A gate closing without working sensors is a genuine hazard to children and pets. We retrofit the sensors and run the conduit they need. Call (866) 623-9848 for a free assessment.
Enterprise’s expansive clay and caliche soils move with the seasons, and monsoon rain makes it worse. Posts shift, hinges settle, and a gate that closed cleanly two summers ago now drags on the driveway. The fix is re-plumbing the hinges and re-setting the posts, not just bending the gate back. Left alone, the drag strains the operator and burns out the motor. Call (866) 623-9848 and we’ll take a look.
Usually, yes, as long as the operator has a compatible trigger input and the power run can handle the added load. Most LiftMaster, Linear, and DoorKing operators in Enterprise homes accept an add-on smart controller or phone entry unit, and the install is measured and scheduled rather than same-day. A free on-site measure confirms what your operator can take and what it will cost, with the price agreed before work starts. Call (866) 623-9848 for a free estimate.
Gate access control on a newer Enterprise home rarely fails the way people expect. The keypad is fine. The remote is fine. The real problem is usually the power behind them and the operator the builder chose. We sort that out with a free measure, a written price, and a 90-Day Done Right Promise on every job. Call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate, and let’s get your gate working the way it should.
Written by the team at Ironworks Gate Co.