Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Enterprise, NV
If your driveway gate stopped halfway this morning or your pedestrian gate is dragging on the concrete, you’re likely in a stretch of southwest Enterprise where desert soil and a decade of summer heat have finally caught up with the hinges. We repair and service driveway and estate gates throughout Enterprise and the 89139 ZIP code, and we answer the phone live, day or night. Technicians who work this valley every week know what caliche-laced ground and 110°F afternoons do to iron and operators. Call (866) 623-9848 and we’ll get a trained technician out to look at it.
Why Enterprise Homeowners Choose Ironworks Gate Co. Summerlin
Enterprise is largely a community of homeowners who plan to stay put, many of them in the master-planned subdivisions off Southern Highlands Parkway and Blue Diamond Road, and they tend to call rather than click. That suits us. A live person answers our phone 24 hours a day, seven days a week, and a free written second opinion is available on any estimate you’ve already received from someone else. Our technicians have up to 13 years of experience and are trained across nine gate-automation brands, including LiftMaster, FAAC, and Mighty Mule, which means the right fix usually happens on the first visit rather than the third.
Every job we complete is covered by our written 90-Day Done Right Promise. If it isn’t right after we leave, we come back and make it right, no paperwork, no arguing. Standard offers include $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Enterprise
Gate Repair
Sagging gates, dragging latches, broken hinges, and stalled operators are our most common Enterprise calls, and most are finished in a single visit. We diagnose the actual cause, whether that’s a settled post or a worn control board, before touching the price.
Learn more about our Gate Repair in Enterprise.

Gate Installation
New driveway and pedestrian gates, including HOA-compliant decorative iron for Southern Highlands and Mountains Edge properties, are measured and quoted in writing before any work is scheduled. We match the style and finish your community requires.
Learn more about our Gate Installation in Enterprise.

Gate Motor & Opener
When a motor hums without moving, reverses on its own, or quits after a power surge, the cause is usually electronics or a failing swing arm rather than the gate itself. We service and replace operators from the brands we’re trained on, including LiftMaster and BFT.
Learn more about our Gate Motor & Opener in Enterprise.

Gate Access Control
Keypads, entry phones, remotes, and vehicle sensors get replaced or reprogrammed so the gate opens for you and stays closed to everyone else. This is measured, ordered work and is scheduled rather than dispatched same-day.
Learn more about our gate access control services in Enterprise.
Gate Parts & Welding
Bent frames, cracked welds, and missing rollers are repaired with proper welding and matched hardware rather than a temporary patch. We also source replacement components for the major automation brands.
Learn more about our gate parts and welding services in Enterprise.
Neighborhoods We Serve in Enterprise
Enterprise runs a wide stretch of the southwest valley, and we cover it end to end. Most calls are answered the same day across the area.
- Southern Highlands and its surrounding custom-home pockets
- Mountains Edge, off Blue Diamond Road
- The homes near Enterprise Library and the 89139 retail core
- Neighborhoods along Decatur Boulevard and Windmill Lane
If you’re unsure whether your street falls in our service area, a quick call settles it.
Why Enterprise’s Climate & Housing Affect Gate Repair
Enterprise is one of the newer corners of the Las Vegas Valley, and that changes what breaks. In master-planned communities like Southern Highlands and Mountains Edge, most gates are only 5 to 15 years old, so homeowners expect them to work like new. They don’t, because the ground beneath them moves. The caliche-laced soil and expansive clays common in the 89139 corridor swell and shrink with the seasons, which knocks posts and hinges out of plumb long before the metal itself wears out. Meanwhile, 110°F summers and relentless UV chew through operator electronics, plastic control boxes, and powder-coat finishes. Add the HOA requirement that a sagging gate be repaired to the community’s approved iron finish, and most Enterprise gate calls turn out to be part re-engineering and part paint matching. That’s why we fix the alignment first and the hardware second.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Enterprise
Enterprise gate repair pricing depends on the cause, not just the symptom. A typical hinge or roller repair runs $150 to $300. A control board replacement or swing-arm realignment usually lands between $280 and $550. Spring, motor, and operator replacements run higher, and we quote each in writing. Every price is settled and agreed before a single bolt is turned, so the bill at the end matches the number you approved at the start. Offers of $50 off repairs over $250 apply. Call (866) 623-9848 for an exact quote; estimates are free.
Service Area – Cities Near Enterprise
Ironworks serves Enterprise and the surrounding southwest valley. We also work in Spring Valley, Paradise, Winchester, and Henderson, and neighbors in each area can reach the same live phone line for scheduling. Visit our home page for the full scope of what we do.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Enterprise
Most gate repairs in Enterprise run between $150 and $550, depending on whether the problem is mechanical or electronic. Hinge and roller repairs sit at the low end, control boards and swing arms in the middle. Call (866) 623-9848 for an exact quote; estimates are free.
Often, yes. Repair calls in Enterprise are frequently handled the same day, and our phone is answered live around the clock. Call (866) 623-9848 and we’ll give you the soonest available time.
A full installation covers measuring the opening, selecting an HOA-compliant gate style, setting posts, hanging the gate, and wiring the operator. It’s quoted in writing before work begins. Call (866) 623-9848 to schedule a free measure.
Yes. Power runs, safety edges, and vehicle sensors are part of our access control and installation work. Because it’s measured and ordered, it’s scheduled rather than dispatched. Call (866) 623-9848 with your gate details for a written price.
Yes. Every completed job is backed by our written 90-Day Done Right Promise, so if something isn’t right we return and fix it. Call (866) 623-9848 to get started.
Contact Ironworks Gate Co. Summerlin
Whether your gate needs a hinge, an operator, or a whole new install, we’re ready to take the call. Enterprise homeowners can reach us any time, and every price is agreed before work starts. Call (866) 623-9848 for a free estimate.
Written by the team at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Enterprise Customers Say
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson