Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Las Vegas
If your gate has stopped opening, is grinding, or has given up in the middle of the driveway, you’re in the right place. We work on gate motors and openers across Las Vegas, from the HOA entrances of the northwest valley to the older block-and-stucco homes near 89108, and we know what desert heat and wind-blown sand do to an operator. Most repairs are done in a single visit, and the price is settled before a bolt is turned. Call (866) 623-9848 and a live person will pick up, any hour.
Why Ironworks Gate Co. Summerlin Is Las Vegas’s Preferred Gate Motor & Opener Company
Homeowners in Las Vegas call us back because we show up when we say we will and leave the gate working. The people who do the work are background-checked, uniformed, and guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. Our technicians have up to 13 years of experience on driveway and estate gates, and we send the same care on the 400th job as the first.
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Linear, so the correct fix usually happens on the first visit rather than the third. Every completed job is covered by the 90-Day Done Right Promise – the Keystone Standard – a written guarantee with no paperwork and no arguing. If something isn’t right, we come back and make it right.
Response to Las Vegas is prompt, and we work the neighborhoods we know: the 1990s-era stucco and tile homes of 89134 and 89144, the mid-century block houses near 89108 and 89130, and everything between. Standing offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a 5% senior and veteran discount, always.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Las Vegas
Our Gate Motor & Opener work covers the full scope on a driveway or estate gate, from a replacement motor to a retrofit on an older operator. Here’s what comes up most in Las Vegas.
Motor Repair in Las Vegas
In Las Vegas, motors rarely fail from age alone. They fail from heat and dust – electronics cooking inside a sun-baked metal box, or a gearbox seizing because the track packed with sand. We diagnose the actual cause before quoting, so you’re not paying to replace a motor that only needed a board, a gear set, or a cleared track. Most repairs finish in one visit.

Slide Motor in Las Vegas
Sliding gates are common on side yards and HOA entrances across the valley, and their rack-and-pinion drive is exactly where desert grit does the most damage. After a summer dust storm in the northwest valley, we regularly find tracks so sand-packed that the operator has burned out its gearbox trying to push through. We clear and align the track, then repair or replace the drive as needed.

Linear Motor Service in Las Vegas
Linear operators are a frequent sight on the tract-home side gates in neighborhoods like 89149 and 89131. We repair and replace Linear motors, sort out control and limit-switch faults, and set the safety reverse correctly. If your Linear unit is old enough that the control board is no longer made, we’ll tell you plainly whether a retrofit makes sense or whether a new operator is the cheaper answer over the next few years.

Motor Installation in Las Vegas
A new motor installation is measured, ordered, and scheduled – not a same-day call – and we quote it in writing before any work begins. We size the operator to the gate, run the power correctly, and set entrapment protection to current standards. On a 1990s installation with a worn hinge post, we check the post first; a modern motor on a sagging gate will simply fail again.
Trusted Brands We Service in Las Vegas
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t claim to stock parts locally – we source what the job needs and aim to get it done in a single visit wherever possible. If your operator is a Mighty Mule on a side gate or a heavy-duty FAAC on an estate driveway, we’ve worked on the platform and know its failure points. When a board or motor is obsolete, we’ll say so and lay out the retrofit versus replacement choice in plain terms.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Las Vegas Homes
- Sand-packed slide tracks that seize the rack and pinion. Wind-driven desert dust packs into the track, and the operator grinds its gearbox trying to push through the grit. This pattern spikes after a dust storm in the northwest valley, so a cleared, aligned track often saves the motor.
- Obsolete control boards and cooked electronics. A 1990s-era board inside a sun-baked metal box at 105°F-plus is a short-lived combination, and replacement boards are frequently no longer made. That’s when we weigh a retrofit against a new unit.
- Worn hinge posts under older swing gates. Many Las Vegas swing gates were hung before modern entrapment rules, and caliche footings shift after a monsoon, so the panel sags. A qualified tech checks the post first and corrects the sag there, then confirms the photocell works.
- Heat-stressed motors and limit faults on Linear and Mighty Mule units. Extreme dry heat and intense UV dry out grease and stress electronics, so operators lose their limits or reverse poorly. We test the full cycle, not just the open.
Pricing for Gate Motor & Opener in Las Vegas, NV
Typical gate motor repair in Las Vegas runs $180 to $450 depending on the fault – a board swap at the low end, a gearbox or motor replacement higher. A slide motor rack-and-pinion repair with a track clear generally lands $250 to $600. A full motor installation on an existing gate runs $850 to $2,200, with operator brand, gate weight, and whether a power run is needed driving the range. We quote in writing and agree the price before any work starts, so there is no surprise on the bill. Estimates are free, and the free second opinion on any written estimate can be a useful check.
We Also Serve Cities Near Las Vegas
We look after gates across Las Vegas and the surrounding communities, including Winchester, North Las Vegas, Sunrise Manor, and Paradise. If you’re just outside the city line, call and we’ll confirm coverage for your address. The same 90-Day Done Right Promise applies wherever we work.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Las Vegas
Often it can be retrofitted with a modern control board or operator that restores entrapment protection, but on a badly heat-cooked unit a full replacement is frequently the cheaper answer over the next few years. We inspect the motor, housing, and gate first, then tell you which option we’d choose in your position. Call (866) 623-9848 for an exact quote – estimates are free.
Because every operator on the street sits in an identical metal box baking at 105°F-plus, so the same control board cooks on the same schedule – neighborhoods like 89134 and 89144 see entrance gate operators fail in clusters the same week. Sand-packed slide tracks after a dust storm compound it. Call (866) 623-9848 and we’ll assess your gate and quote a repair or retrofit.
Yes – any swing gate hung before modern UL 325 entrapment rules should be checked and brought up to current standards, with photocells and a reversing function verified on the full cycle. Older panels sag when caliche footings shift, which makes protection more important. Call (866) 623-9848 to have yours checked – estimates are free.
Almost always a sand-packed track that seized the rack and pinion, so the operator ground its gearbox trying to push through the grit. The fix is to clear and align the track, then repair or replace the drive. Call (866) 623-9848 for an exact quote on your gate.
Not reliably – on most older Las Vegas swing gates the sag comes from the hinge post footing shifting in caliche soil, so adjusting only the panel just hides it and the gate droops again. A qualified tech checks the post first and corrects it there. Call (866) 623-9848 and we’ll give you a straight answer and a written price.
When your gate motor needs attention, don’t wait for it to fail completely in the middle of the driveway. Call Ironworks Gate Co. Summerlin at (866) 623-9848 – a live person answers 24 hours a day, 7 days a week – for a free estimate. Upfront pricing, settled before any work starts, and every job backed by the written 90-Day Done Right Promise. A square deal, and done right.
Written by the team at Ironworks Gate Co.