Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Sunrise Manor
If your driveway gate won’t open, stalls halfway, or needs a new operator, we handle gate motor and opener work across Sunrise Manor, NV. We know this side of the valley: the unincorporated blocks off East Charleston and North Lamb, the working lots that run toward the desert edge, and the gates people here fixed rather than replaced. Our technicians have up to 13 years of experience, and a live person answers every call at (866) 623-9848, day or night. When your gate is stuck open on a 105-degree afternoon, that matters.
Why Ironworks Gate Co. Summerlin Is Sunrise Manor’s Preferred Gate Motor & Opener Company
Sunrise Manor is its own kind of neighborhood, and we treat it that way. Because it’s unincorporated, most gate work here happens on owner-built and aftermarket gates, not the builder-installed, HOA-standard gates you see in North Las Vegas or Henderson. That means operators have to be matched to irregular gates, not pulled off a shelf and bolted on. Our technicians are trained and equipped on nine gate-automation brands, so they can fit the right operator to the gate that’s actually on your driveway.
Sunrise Manor customers call us because the job gets done once, correctly, and backed in writing by our 90-Day Done Right Promise. The price is settled before a single bolt is turned, so the bill matches the quote. And when a desert-edge slide gate jams in the afternoon heat, you reach a live person, not a voicemail tree.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Sunrise Manor
Every sub-service below gets the same treatment: a technician who checks the gate and its hardware first, then the operator, and quotes the work up front.
Motor Repair in Sunrise Manor
Most Sunrise Manor repair calls start with a slide gate that binds and stalls in the afternoon heat. The cause is usually grit in the rollers, a hinge post worked loose by temperature swings, and a failed safety photocell all at once. A qualified technician clears the track, corrects the post footing, tests entrapment protection, and only then adjusts the operator’s force settings.

Slide Motor Service in Sunrise Manor
Sliding gates near the desert edge collect windblown sand and tumbleweed grit, and that load strains the operator until it trips its overload. We service and adjust slide operators, check rollers and track, and reset the force limits to the gate’s real load rather than leaving them maxed out.

Motor Installation in Sunrise Manor
New operators here are matched to the gate, not the other way around. Because so many 89110 driveways have aftermarket or owner-built gates, a correct install starts with measuring the gate’s weight, travel, and grade. We’ll give you a free measure and a written price before any ordering begins.

Linear Motor & Safety Photocell Work in Sunrise Manor
Linear operators are common on Sunrise Manor slide gates, and UV and dust degrade both the motor housing and the safety photocells around it. We service Linear systems and check the entrapment protection wiring, because a gate without working photocells is a liability. Safety matters here: gate operators and their reversing sensors are a serious hazard. We test and adjust them to UL 325 standards and don’t recommend homeowner repairs on the motor or sensor circuit.
Trusted Brands We Service in Sunrise Manor
Our technicians are trained and equipped on nine gate-automation brands, including Linear, DoorKing, Elite, and Mighty Mule. Whatever operator is on your driveway, we’ll diagnose it and make the correct fix on the first visit, without pretending to stock parts we don’t. If a part needs to be ordered, we tell you plainly and schedule the return visit. Fast turnaround matters, and upfront honesty about parts is part of it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Sunrise Manor Homes
- Slide gates that stall in high heat. Sand and tumbleweed grit jam the track, the operator strains, and its overload trips. This is the most common Sunrise Manor service call we get.
- Swing gates that sag and bind. Extreme temperature swings (100°F-plus afternoons, cold winter nights) work hinge posts loose, so the gate drops against the rack and pinion and the motor fights it.
- Dead safety photocells. UV and dust degrade the photocell and keypad wiring, leaving the gate operating without entrapment protection. This is a safety issue, not a minor annoyance, and a licensed professional should inspect it.
- Age and layout. Many 89110 homes are mid-century to 1980s-90s ranchers on quarter-acre lots with block walls and exposed-aggregate driveways. Their owner-built or aftermarket gates wear differently than tract-standard ones.
Pricing for Gate Motor & Opener in Sunrise Manor, NV
Pricing in Sunrise Manor reflects the neighborhood’s older, owner-built gates. A motor repair typically runs $180 – $380. A slide motor replacement runs $550 – $1,200, and a Linear motor install runs $650 – $1,400. Safety photocell replacement runs $120 – $280. What moves the number is gate weight, the state of the track and posts, and whether the operator needs to be reset or replaced. The price is quoted and agreed before any work starts, and you’ll never see a bill bigger than the quote. We also offer a free second opinion on any written estimate.
We Also Serve Cities Near Sunrise Manor
We serve Sunrise Manor and surrounding communities, including Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just outside the 89110 area, reach out and we’ll confirm coverage. See our full Sunrise Manor page and our Gate Motor & Opener hub for more detail.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Sunrise Manor
Most Sunrise Manor properties don’t have HOA architectural approval requirements, because the area is unincorporated and lacks the tract-uniform design rules of nearby cities. That’s why so many gates here are owner-built. Check your deed for any recorded restrictions, and we’ll match the operator to your actual gate. Call (866) 623-9848 for a free measure and written price.
Afternoon heat makes the metal expand and lets windblown sand pack into the track, so the operator strains against the load and trips its overload. On the desert edge near Sunrise Manor, this is the most common cause we see. A technician clears the track and tests the safety photocells before resetting the operator’s force limits. Call (866) 623-9848 for an exact quote.
A slide operator on a sealed track handles sand and tumbleweed better than a swing operator on an exposed rack and pinion. The right choice depends on your gate’s weight and the grade of your driveway. We’ll diagnose your gate and recommend an operator matched to it, not a default model. Estimates are free.
After a dust storm, the first thing to check is whether grit has blocked the keypad buttons or coated the intercom’s microphone and speaker. Don’t open the keypad or intercom housing to poke around the wiring; dust and moisture inside can cause shorts. We test the entry wiring and restore the system properly. Call (866) 623-9848 for a free estimate.
Yes, most operators in Sunrise Manor can take a battery backup so the gate still opens during a power outage and after a heat-related overload reset. Whether it fits your unit depends on the operator’s make and its control board. We’ll check compatibility and give you a written price before we order anything. Estimates are free.
Written by the team at Ironworks Gate Co.