A Ironworks company - serving Summerlin, NV
Gate Parts & Welding in Sunrise Manor, NV | Ironworks Gate Co. Summerlin

Gate Parts & Welding in Sunrise Manor - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Sunrise Manor

If your driveway gate drags, your RV gate won’t latch, or a hinge post has started to lean, we can help. Ironworks Gate Co. handles gate parts and welding throughout Sunrise Manor, including the neighborhoods off East Charleston Boulevard and the streets that run toward the desert edge in 89110. We know how these gates were built here, and we know why they fail. Most of the gates we see in Sunrise Manor were hung by the homeowner or a previous owner, not by an HOA, and they’re older than the trucks in the driveway. Call (866) 623-9848 and a live person will answer, day or night.

Call (866) 623-9848

Why Ironworks Gate Co. Summerlin Is Sunrise Manor’s Preferred Gate Parts & Welding Company

Sunrise Manor is its own kind of place. It’s an unincorporated pocket of the valley, older and working-class, and most of the gates here sit on privately owned lots with block-wall perimeters rather than the uniform tract gates you see across the line in North Las Vegas or Henderson. That difference matters when something breaks. There’s no builder standard to fall back on, no warranty desk to call. You need someone who can look at a one-off gate and figure out how it was put together, then fix the actual problem.

We’ve built a reputation in Sunrise Manor by doing exactly that: repairs that hold, welds that don’t crack six months later, and hardware that keeps working through another summer. We don’t carry parts on a truck, so when a job needs a specific hinge, roller, or control board, we order it and come back with the right piece instead of forcing a fit. Our technicians have up to 13 years of experience with gate hardware and welding, and every completed job is covered by our written 90-Day Done Right Promise – the Keystone Standard. If it isn’t right, we come back and make it right, no paperwork and no arguing.

We answer the phone around the clock, which matters when a gate won’t close at ten at night and your driveway is standing open. Calls from Sunrise Manor get the same straight answer whether it’s Tuesday morning or Sunday evening: we’ll tell you what’s wrong, what it will cost, and what we can do about it.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Sunrise Manor

The work we do in Sunrise Manor tends to fall into a few familiar categories. Older gates, worn metal, and hardware that’s been baking in the sun for years. Here’s what we handle most often.

Hinge Replacement in Sunrise Manor

Worn hinges are the most common reason a swing gate sags and drags. On Sunrise Manor’s older wrought-iron and chain-link driveway gates, the hinges are often original and have lost their pin clearance, so the gate drops and scrapes the ground. We cut out the old hinges and weld in new ones sized to the gate’s weight, then re-hang the leaf so it swings true again.

Hinge Replacement in Sunrise Manor

Post Replacement in Sunrise Manor

When a hinge post has pulled loose from its footing or rusted through at the base, no amount of adjusting will fix the sag. This is common on the block-wall perimeters around 89110, where the gate post has taken decades of sun and shifting soil. We assess whether the post can be re-set or needs full replacement, then set the new post plumb and weld the gate hardware back into place.

Post Replacement in Sunrise Manor

Rail Repair in Sunrise Manor

Rails take a beating from windblown sand and from gates being pushed open past their stops. A bent or cracked rail throws the whole leaf out of square, and the gate never latches cleanly again. We straighten what can be straightened, cut out and weld in new rail sections where the metal is too far gone, and check the gate’s alignment before we leave.

Rail Repair in Sunrise Manor

Custom Welding in Sunrise Manor

Many Sunrise Manor properties have gates that were built on site to fit a particular opening, and there’s no catalog part that fits them. That’s where custom welding comes in. We fabricate hinge brackets, latch plates, and repair sections to match what’s already there, whether it’s wrought iron, steel tube, or a chain-link frame. If you want an RV gate that matches the look of your block-wall perimeter, we can build one that fits the opening and the style.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 623-9848

Trusted Brands We Service in Sunrise Manor

Gate operators in this part of the valley come in a handful of familiar makes. We’re trained and equipped to service LiftMaster, FAAC, DoorKing, and Mighty Mule systems, among others, so when your operator needs a control board, a limit switch, or a new set of safety edges, we know the platform. We don’t stock parts, but we source the correct replacement for your model and return to install it. For older systems where the factory part is gone, we’ll tell you plainly whether a retrofit kit will work or whether a new operator is the smarter spend. A square deal, quoted before we turn a bolt.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Sunrise Manor Homes

  • Obsolete control boards on legacy operators. Plenty of Sunrise Manor driveways still run an older LiftMaster or FAAC unit whose control board is no longer made. We’ll check whether a retrofit board or kit is available before recommending a full operator replacement.
  • Worn hinge posts and footings on manual swing gates. Years of sun-baked metal and desert grit wear the hinge pin and the footing at the same time, so the gate sags and binds. Sand caught in the rollers and tracks speeds this up.
  • Gates hung before modern safety requirements. Older gates in Sunrise Manor often have no safety photocells or edge sensors at all. Where an operator is present, retrofitting UL 325 entrapment protection is the right call.
  • Rack-and-pinion and roller wear on sliding gates. Windblown sand and grit grind away at the rack and the track rollers, so the gate hesitates or jams partway. Cleaning and re-aligning helps; replacing worn rollers and rack sections fixes it.

There’s a pattern to all of this, and it’s specific to where Sunrise Manor sits. On the east side near the desert edge, windblown sand and tumbleweed pile up against driveway and RV gates, and the swing from 100°F-plus afternoons to cold winter nights works gate hardware loose faster than in the sheltered parts of the valley. Metal expands and contracts every day, and over enough seasons that movement loosens bolts, opens weld seams, and wears hinge pins. If your gate needs attention every spring, that’s usually why – it’s the conditions, not bad luck.

A typical gate parts and welding call in Sunrise Manor involves an older swing gate or slide gate on a block-wall perimeter, where years of sun-baked metal and dust have worn the hinge post or the rack and pinion to the point of binding. The usual cause is a failed hinge post footing or a corroded operator control board. A qualified local pro will assess whether the post can be re-set or must be replaced, then correct the sag, weld new hinges, and retrofit safety photocells if an operator is present.

Pricing for Gate Parts & Welding in Sunrise Manor, NV

Here’s what the work generally runs in this part of the valley. A typical hinge replacement in Sunrise Manor runs $150 to $350 per gate, depending on how much old hardware has to be cut out. Replacing a hinge post runs $250 to $600, since setting a post plumb in a block-wall perimeter takes more time than a simple weld. Rail repair runs $120 to $400. Custom welding is quoted per job, usually $75 to $150 an hour plus material, and a full custom RV gate typically falls between $800 and $2,200. When an obsolete control board has to be replaced with a retrofit or a new operator, budget $350 to $900 depending on the platform.

Where your job lands in those ranges depends on the gate, the material, and how much corrosion we find once we open it up. We quote and agree on the price before any work starts, so the bill matches the quote. Estimates are free, and we’ll give you a second opinion on any written estimate you already have. There’s $50 off any repair over $250, and a standing 5% discount for seniors and veterans.

We Also Serve Cities Near Sunrise Manor

Sunrise Manor sits right next to several other communities we cover. We take gate parts and welding calls in Whitney, Winchester, Las Vegas, and North Las Vegas, and the work is much the same – older gates, worn hardware, and the honest question of repair versus replacement. If you’re on the Sunrise Manor side of the line and want to know whether your gate can be saved, our Gate Parts & Welding in Sunrise Manor team will give you a straight answer.

Serving Sunrise Manor, NV – Our Local Coverage Area

We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Sunrise Manor

Why Sunrise Manor Chooses Ironworks Gate Co. Summerlin

We set the standard for gate parts & welding in Sunrise Manor.

30-60 Min Response

Fast dispatch across Sunrise Manor. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Sunrise Manor

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Sunrise Manor - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Sunrise Manor Customers Say

Trusted by homeowners across Sunrise Manor and surrounding areas.

★★★★★

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

Veronica Ramirez
★★★★★

"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."

Erin Sutton
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson

Ready for Gate Parts & Welding in Sunrise Manor?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Sunrise Manor.

(866) 623-9848

Request a Free Estimate in Sunrise Manor

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch