Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Paradise, NV
We repair Ghost Controls gate operators across Paradise, NV, from the Strip corridor east to the tract streets west of it. The one thing that makes our Ghost Controls work here different: a good share of the “motor failure” calls we get in Paradise aren’t motor failures at all. They’re binding gates on heaving slabs. We’re independent Ghost Controls specialists, not affiliated with or authorized by the manufacturer, and we’ve seen what desert heat does to these boards. Call (866) 623-9848 and a live person answers, day or night.

Why Paradise Residents Choose Us for Ghost Controls Service
Ghost Controls builds a tough operator. In Paradise, tough isn’t always enough. Our technicians have up to 13 years of experience, they’re background-checked and uniformed, and they’ve worked on Ghost Controls units from the original single-arm kits to the newer tubular steel models that have found their way onto so many Paradise tract home driveways.
We’re trained and equipped on nine major gate-automation brands, Ghost Controls among them, so we diagnose the whole system instead of guessing at the box. Most jobs finish in a single visit. The price is settled with you before a single bolt is turned. And the work is backed by our written 90-Day Done Right Promise.
That’s the Ghost Controls service we bring to Paradise: warm, plainspoken, and on time. Call (866) 623-9848 for a free estimate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Paradise
These are the failures we run into most on Ghost Controls equipment around Paradise. Most of them trace back to a specific local condition.
- Control board heat failure. Direct desert sun on the operator housing can crack solder joints and leave the board intermittent or dead. On west-facing stucco walls it happens faster. If your gate goes quiet on hot afternoons and works again at dusk, suspect the board.
- Photo-eye misalignment from dust and wind. Fine grit collects on the lenses and wind-blown debris knocks the sensors out of line. The gate thinks something’s in the way and refuses to close – a very common call on Paradise’s windy days.
- Battery backup degradation. Summer heat plus occasional monsoon humidity shortens battery life in the GHOST-BB series. The gate dies during an outage because the backup had quietly given up months earlier.
- Limit switch drift on slide gates. Soil movement under the west side’s 1970s-80s concrete slabs cracks the track, the gate binds, and the operator overruns or reverses mid-cycle. The motor is fine. The ground underneath isn’t.
- Seized hinges and post damage. Decades of heat cycling and dust wear out hinges on wrought iron and tubular steel gates, and a sagging post throws the whole swing geometry off. We repair hinges and reset posts rather than pushing a full replacement.
Ghost Controls Service in Paradise: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes most Ghost Controls work in Paradise: on the west-side 1970s-80s tract streets, the original slide-gate tracks were set into bare concrete slabs, and those slabs have heaved from desert soil movement. So a Ghost Controls slide operator that is otherwise healthy binds seasonally and trips its limits. A homeowner calls it a motor problem. It’s a track and slab problem.
That distinction matters. You don’t replace a perfectly good GHOST-1000 because the ground moved. A qualified technician repairs or realigns the track, cleans and realigns the photo-eyes, then resets the limits and tests the battery backup under load. On the west side of Paradise, that sequence resolves more “dead operator” calls than any board swap we do. Getting the diagnosis right the first time is the whole job.
Ghost Controls Models & Products We Service in Paradise
We service the full Ghost Controls line that shows up on Paradise driveways: the GHOST-1000 Heavy-Duty Single Swing, the GHOST-2000 Dual Swing, the GHOST-3000 Solar-Compatible operator, and the GHOST-BB Battery Backup system.
On parts, we’re picky. Ghost Controls’ own boards and photo-eyes are the only reliable match for their proprietary control logic, so we use OEM on those. For arms, rollers, and batteries, a high-quality aftermarket part often outlasts the original in desert heat. Every part is sourced for your specific job and confirmed with you as part of the written price. We don’t claim local stock; we order what the gate actually needs.

See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Paradise
Ghost Controls repair pricing in Paradise depends on what’s actually wrong. We quote and agree the number before any work starts, so there’s nothing on the bill you didn’t approve.
- Diagnostic and service call: typically $89-$150
- Photo-eye replacement or realignment: roughly $120-$220
- Battery backup replacement (GHOST-BB): about $180-$320
- Control board replacement: around $280-$520
- Slide track realignment or repair: $200-$650, depending on how much slab is involved
- Hinge and post repair: varies with the gate; quoted on site
A free estimate includes a full inspection: operator, board, sensors, battery, track, and gate hardware. Standing offers: $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Senior and Veteran 5% discount, always. Call (866) 623-9848 for an exact quote.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Paradise
Afternoon heat is usually the trigger, not the root cause. A control board with cracked solder joints, or a photo-eye with heat-related drift, will act up once the housing bakes in direct sun. We test the board and sensors under load to find it.
Not always. On Paradise’s west side, a heaving slab cracks the track, and the gate binds as the day heats and the metal expands. The operator trips its limits to protect itself. We check track and slab before we ever condemn a motor. Call (866) 623-9848 for a free estimate.
Two ways: humidity shortens battery-backup life, and pooling water at the footing can corrode connections and mountings. A pre-season check of the battery and footing saves a lot of grief.
Usually, yes. Ghost Controls units accept most keypads and intercoms that match their control voltage, and we’ll confirm compatibility before we quote. Adding one is a scheduled job, not a same-day emergency repair.
Often repairing is the smarter money. A board swap usually costs far less than a new unit, unless the enclosure has cracked from heat or the motor has seized. Our free second opinion on any written estimate helps you decide with open eyes. Call (866) 623-9848.
Service Areas Near Paradise
We also serve homeowners in Summerlin, Spring Valley, Las Vegas, Enterprise, and Winchester, all within easy reach of Paradise. The same Ghost Controls Gate Repair service backs every one of them, and our technicians know the local gate stock across this stretch of the valley. Call (866) 623-9848 to schedule service.
Book Your Ghost Controls Service in Paradise Today
If your Ghost Controls gate is binding, reversing, or dead after a power outage, we can help. A live person answers (866) 623-9848 any hour, any day – no voicemail, no callback queue. Repairs are handled same-day where schedules allow, and the price is agreed before we start. Done right, and backed in writing.
Written by the team at Ironworks Gate Co.