Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Paradise, NV
If your driveway gate has started to drag, stall, or quit halfway open, you’re in the right place. Ironworks Gate Co. Summerlin handles gate repair across Paradise, from the tract streets on the west side to the resort and airport-adjacent properties near the Strip corridor. We answer the phone live, day or night, and we’ll give you a straight answer about what’s wrong and what it costs before anyone touches a bolt. Call (866) 623-9848 and we’ll set up a free estimate.
Why Paradise Homeowners Choose Ironworks Gate Co. Summerlin
Paradise isn’t a place where a gate gets a lot of slack. Between the heat, the dust, and the traffic pressure from the Strip and the airport, a driveway gate here works harder than it would almost anywhere else in the valley. Homeowners call us because we know that, and because we fix it right the first time instead of coming back three weeks later for the same problem.
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule, so whatever motor is bolted to your driveway, there’s a good chance we already know its control board, its limits, and its failure points. Every job carries our 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right, no arguing about it. Our technicians come background-checked and uniformed, and they work in your home the way they’d work in their own mother’s.
We serve the whole stretch of Paradise, including the older tract streets around the Boulevard Mall area and the gate-heavy properties near the Convention Center corridor. We give you a price up front, in writing, before we start. That price doesn’t move.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Paradise
Ironworks handles the full scope of gate work, from a hinge that’s gone soft to a brand-new automated driveway gate. Here’s what we do in Paradise.
Gate Repair
Bent frames, sagging hinges, gates that bind against the ground, and operators that quit mid-cycle all get diagnosed and repaired. In Paradise’s older tract subdivisions, we regularly find original slide tracks that have heaved out of cracked concrete slabs, so the gate drags even though the motor is fine. We find the real cause before quoting the fix.
Learn more about our Gate Repair in Paradise.

Gate Installation
New driveway and estate gates, hung and aligned to your concrete, with the posts and footings done to hold up in desert soil. We measure on site and give you a written price before anything gets ordered, so a new gate is a scheduled project, not a same-day surprise.
Learn more about our Gate Installation in Paradise.

Gate Motor & Opener
Motor replacement, control board repair, limit setting, and photo-eye work on the nine brands we’re certified on. Paradise heat is brutal on operators, and most original motors here are already on their second or third unit, so we check the whole system, not just the box that quit.
Learn more about our Gate Motor & Opener in Paradise.

Gate Access Control
Keypads, entry systems, and remote programming for gates that need controlled access. We set it up so the people who should get in do, and the ones who shouldn’t don’t. This work is measured and scheduled, with a written price agreed before we start.
Learn more about our home services and how we coordinate access control with the rest of the gate.
Gate Parts & Welding
Hinges, rollers, tracks, latches, and structural welding on wrought iron and tubular steel. If a weld has cracked or a bracket has pulled loose, we repair the metal properly rather than patching it with something that won’t hold through a Paradise summer.
Neighborhoods We Serve in Paradise
Paradise is a built-up unincorporated strip with few neighborhood names of its own. It runs along the Las Vegas Strip corridor and Reid airport on the east and the mid-century and 1970s-80s subdivisions to the west, and gate work here splits into two very different worlds: high-traffic commercial and security gates near the resort and airport properties, and aging driveway and pool gates in the older tract homes. Most Paradise addresses fall in ZIP 89105. Wherever you are in that stretch, we can usually get out the same day for a repair call.
- The Boulevard Mall and Convention Center area
- Streets around the University of Nevada, Las Vegas edge
- Tract subdivisions near the airport side of the corridor
- Residential blocks along the Winchester-adjacent west side
See the difference
Before
After
Before
After
Before
AfterWhy Paradise’s Climate & Housing Affect Gate Repair
Paradise sits in some of the harshest gate weather in the country. Summer heat past 115°F cooks operator control boards and photo-eye sensors, and the seasonal dust and wind storms jam tracks and dry out hinges until they squeal. The rare but intense monsoon rains pool water at driveway gate footings, and desert soil movement does the rest. On the west-side 1970s-80s tract streets, the original slide-gate tracks were set into bare concrete slabs that have since heaved and cracked, so gates bind seasonally even when the operator is working perfectly. That pattern shows up again and again in the older subdivisions here, and it’s a big part of why a gate that “just needs a new motor” often doesn’t. Most of the housing is stucco-on-frame with slump-block walls and concrete driveways, with wrought iron and tubular steel gates on block pillars the norm. We know what fails and when.
Pricing for Gate Repair in Paradise
You’ll get a written price from us before any work starts, and that price is what you pay. Typical ranges for Paradise:
- Hinge, roller, or latch repair: $125 – $275
- Track realignment or re-weld: $175 – $400
- Control board or photo-eye replacement: $220 – $450
- Gate motor replacement: $550 – $1,200, depending on the brand and gate weight
Every repair over $250 comes with $50 off, and we’ll give a free second opinion on any written estimate you’ve already got. There’s also a permanent 5% discount for seniors and veterans. Call (866) 623-9848 for an exact quote.
Service Area – Cities Near Paradise
We work throughout Paradise and the surrounding communities. If you’re just outside the Paradise line, we also serve Winchester, Whitney, Spring Valley, and Enterprise. Call (866) 623-9848 and we’ll confirm your address and get you on the schedule.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Paradise
Most Paradise gate repairs run between $125 and $450, with motor replacements higher, from $550 to $1,200 depending on brand and gate weight. You’ll get a written price before any work begins. Call (866) 623-9848 for an exact quote, and estimates are free.
In most cases, yes. We answer the phone live 24 hours a day, every day, and same-day repair calls are common throughout Paradise. A live person, not a voicemail, takes your call. Call (866) 623-9848 and we’ll tell you the soonest we can be there.
That’s often a track or footing problem, not a motor problem. In older Paradise tract streets, the original slide tracks were set into concrete slabs that have since heaved and cracked from soil movement, so the gate binds seasonally even when the operator is healthy. We check the track, footing, and alignment before recommending a new motor. Call (866) 623-9848.
Very likely. We’re trained on nine gate-automation brands, including LiftMaster, BFT, and FAAC, so whatever’s on your driveway, we can service it. Call (866) 623-9848 and tell us the brand and model.
Installation is a scheduled project, not a same-day call. It includes an on-site measure, a written price before anything is ordered, the gate hung and aligned, and the operator wired and set up. We give you a firm price up front. Call (866) 623-9848 for a free measure and written estimate.
If your gate is sticking, sagging, or refusing to open, don’t wait for it to fail completely. Call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate anywhere in Paradise. We’ll tell you what’s wrong, give you a straight price, and stand behind the fix in writing. Our technicians bring up to 13 years of experience to the job, and we’ll be there when we say.
Written by the team at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Paradise Customers Say
"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson