Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Boulder City
If your gate has started to drag, pull loose from its post, or latch hard enough that you have to lift it to close, we’re the call to make in Boulder City. Ironworks Gate Co. Summerlin handles gate parts and welding for the older masonry-pier properties in the historic core and the custom homes spreading toward the edges of town. We know this town’s gates are different from what you’ll find across the valley: many were built to government specifications in the 1930s and deserve repair, not a modern replacement panel bolted on. Call us at (866) 623-9848 and a live person will pick up, day or night.
Why Ironworks Gate Co. Summerlin Is Boulder City’s Preferred Gate Parts & Welding Company
Boulder City homeowners tend to call rather than click, and they remember the last contractor who let them down. That suits us fine. We answer the phone with a real person 24 hours a day, seven days a week, and we quote a price before a single bolt is turned. For heavier bespoke and ornamental gates, that upfront price matters even more, because a custom gate panel is expensive to redo and a cheap fix on a heavy swing gate usually shows up within a season.
Our technicians have up to 13 years of experience, and they’re background-checked and uniformed on every job. The work is covered by our 90-Day Done Right Promise, a written guarantee with no paperwork and no arguing: if something isn’t right, we come back and make it right. The company behind that promise has been working on gates for over 42 years, and the 400th job gets the same care as the first. Standing offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
On response time: for repair and welding calls in ZIP codes 89005 and 89006, we aim to get a technician out the same day when the schedule allows, and emergency gate failures get priority. For custom fabrication or new hardware that has to be ordered, we measure first and schedule the work, so you get a written price rather than a promise.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Boulder City
Every gate problem comes down to a handful of failing parts, and most are fixable in a single visit. Here’s what we handle most in Boulder City.
Hinge Replacement in Boulder City
Worn hinge barrels are the usual cause of a gate that sags or scrapes the ground, and on Boulder City’s older masonry-pier entries the culprit is often the hinge itself rather than the panel. We match hinge hardware to the weight of the gate and the condition of the masonry, so a heavy original iron gate swings on hardware built for it. A typical hinge replacement runs $150 to $400 per gate depending on hardware and how much the pier has moved.

Post Replacement in Boulder City
When a gate won’t stay true no matter how you adjust it, the post footing has usually failed. Monsoon wind and dust storms work a gate loose over the years, and the load ends up on a footing that was never meant to take it. We dig, reinforce or re-pour the footing and re-hang the gate square. Post replacement in Boulder City typically runs $350 to $900, more where the post is set into masonry or ornamental work has to come apart to reach it.

Rail Repair in Boulder City
Bent rails and cracked welds on an ornamental gate are a repair job, not a replacement job. We straighten rails, re-weld fractured joints, and match the profile so the repair disappears into the original work. That matters most on the historic-core gates, where a modern rail section would stand out. Rail repair usually runs $120 to $350 depending on how much of the run is affected.

Custom Welding in Boulder City
Some gates need a bracket, a hinge plate, or a matched section that doesn’t exist off the shelf. Custom welding covers that ground: we fabricate the part, weld it in place, and check the operator’s travel afterward so the gate still runs true. Expect $200 to $600 for most custom welding, and we’ll quote it in writing before we start. When you need this combined with hardware adjustments or automation checks, our Gate Parts & Welding team handles the whole scope in one visit.
Trusted Brands We Service in Boulder City
We’re trained and equipped on nine gate-automation brands, including Viking, Ghost Controls, DoorKing, and Elite, so the correct fix gets made on the first visit whatever is on your driveway. We don’t stock parts locally and we don’t pretend to: what we do is diagnose accurately, order what’s needed, and get back out to finish the job rather than leaving a gate half-open while a wrong part sits in a box. With heavy custom gates, that means checking the operator’s limits and safety photocell after any welding or hardware change, because a gate that runs silently for years depends on everything being set right, not just tight.
Common Gate Parts & Welding Problems We See in Boulder City Homes
- Original Bureau-era wrought-iron pedestrian gates pulling loose from aged masonry piers. On the tight historic-core lots, the anchors were set into masonry decades ago, and the gate eventually works them loose. The fix is usually re-anchoring and re-welding, not replacing the gate.
- Underground slide-gate operators and rollers fouled by monsoon sand and dust. Sand driven into tracks wears rollers fast and makes a slide gate grind.
- Powder coat and paint baked brittle by UV and low humidity. Once the coating cracks, the steel underneath starts to corrode, and properties near the Lake Mead side see it sooner because of the added moisture exposure.
- Heavy custom swing gates sagging on hinges that were never built for the panel’s weight. The gate itself is fine. The hardware underneath it isn’t.
See the difference
Before
After
Before
After
Before
AfterRestoring Boulder City’s Original 1930s Iron Gates, Not Replacing Them
Boulder City is a 1930s federal company town built by the Bureau of Reclamation for Hoover Dam workers, and much of the historic core still carries the original Bureau-built bungalows and early masonry homes, along with their original or mid-century iron and steel gates and fences. Those gates were built to government specifications. They are heavier, plainer, and more solidly made than most of what went up later, and they can usually be repaired rather than replaced, provided whoever does the work matches the 1930s-40s wrought-iron profile and lets the patina stay. That’s what makes this town different from anywhere else in the valley: “restore the original gate” is a real, recurring job here, not a special request.
It also means the work is sometimes governed by more than the homeowner. The city’s historic preservation review can cover what changes are allowed on original pedestrian gates and masonry-pier entries in the historic district. So a technician working here has to repair and match patina on government-built metalwork instead of swapping in a modern gate, and has to know when a proposed change needs review before it’s made. That’s a conversation we’d rather have before the welding torch comes out.
A typical job on one of these older masonry-pier properties looks like this: a heavy original or mid-century iron driveway gate starts dragging and latching hard after years of monsoon wind and dust working the hinges loose. The cause is usually a failed hinge post footing or worn hinge barrels, not the gate panel itself. A qualified local pro digs and re-pours or reinforces the post footing, re-hangs the swing gate with matched hardware, corrects the sag, and then checks the underground operator’s limits and safety photocell so the gate runs quietly again. That’s the difference between a fix and a patch.
Pricing for Gate Parts & Welding in Boulder City, NV
We quote in writing and agree on the price before any work starts, so there’s no invoice surprise later. For Boulder City, here’s roughly what the common jobs run:
- Hinge replacement: $150 to $400 per gate
- Post replacement or footing repair: $350 to $900
- Rail repair: $120 to $350
- Custom welding and fabrication: $200 to $600
- Latch and lock hardware replacement: $120 to $300
- Gate roller replacement on a slide gate: $150 to $350
Historic-core work costs more when matching original profiles and patina is involved, and masonry-pier entries add labor because the pier has to come apart to reach the anchor. We offer a free second opinion on any written estimate, so if you’ve had a quote that felt high, send it over. Call (866) 623-9848 for an exact quote.
We Also Serve Cities Near Boulder City
We work throughout the area around Boulder City, including Henderson, Whitney, Paradise, and Enterprise. If you’re just outside the 89005 and 89006 ZIP codes and aren’t sure whether you’re covered, call and ask. Someone will answer and tell you straight.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Boulder City
Yes, in most cases it can. These gates were built to government specifications and are heavier and more solid than later work, so repairing and re-matching the original wrought-iron profile and patina is usually the better call. Where the historic preservation review applies, we’ll tell you what changes are allowed before any work starts.
Because the panel usually isn’t the problem: the hinge post footing or the hinge barrels have failed. Adjusting the panel on top of loose hardware just moves the sag around. The durable fix is re-pouring or reinforcing the footing, re-hanging the gate with matched hardware, and then checking the operator’s limits and safety photocell so it runs true and quiet.
We’re trained and equipped on nine brands, including Viking, Ghost Controls, DoorKing, and Elite. That coverage matters after welding or hardware work, because the operator has to be re-set properly once the gate geometry changes. Call (866) 623-9848 with the brand and model and we’ll confirm before we come out.
Once a year is the right rhythm in this climate, and more often on a gate that runs daily. Monsoon sand and dust foul photocells and rollers, and UV-baked housings crack. Our $89 seasonal tune-up covers the check, and it’s cheaper than an operator that fails in July.
Yes. Properties closer to the Lake Mead shoreline see more corrosion on hinges, latches, and powder-coated steel, because the added moisture exposure speeds up rust once the coating cracks. We check coating condition as part of any welding or hinge job on that side of town and recommend re-coating before the steel goes.
If your gate needs parts, welding, or a straight answer about whether to repair or replace, call Ironworks Gate Co. Summerlin at (866) 623-9848 for a free estimate. We quote in writing before we start, we show up when we say we will, and every job is backed by our 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co. Summerlin.